of course. But we have inquiry about the quantity, different product have different quantitys.
A: If the sample cost less than $20, we can supply for free, but express cost is charge on your side.
A: about 10,000 pcs/daywe have more than 150 workers, 3 production lines.
A: 1/4"*3/8"1/4"*5/8"3/8"*5/8"1/4"*1/2"generally length is 3m,3.5m,4m,5m,7m,10m,15m,20m.we also can produce according customers requirement.
A: some manifold with charging hose, like CT-536G, the price according to the refrigerant , R12/22/502 is cheaper than R410A.another way, we have two different packing: 1.carton box; 2. color plastic box.
A:8G 105MM*16MM10G 115MM*16MM12G 105MM*19MM15G 115MM*19MM20G 135MM*19MM25G 125MM*25MM30G 140MM*25MM40G 170MM*25MM50G 200MM*25MM
A:Our generally size as following: (we also can produce according to customers requirement)valve length+copper length+copper thickness16mm+100mm+0.32mm16mm+80mm+0.32mm16mm+70mm+0.32mm18mm+100mm+0.32mm18mm+80mm+0.32mm20mm+100mm+0.32mm20mm+80mm+0.32mm22mm+100mm+0.4mm22mm+80mm+0.4mm
A: usually 1~5 years.
A: 1700*800*1.5mm this size use for solar penal.
A: Generally thickness is 1.2mm, we also can produce 1.1mm or 1.0mm, according to customers requirement.By the way, roll bond evaporator can produce single side and double side, single side is more expensive.
A:1.Fin condenser/evaporator:usually 25 days. according to your drawings. If it is very complex, will need more days.2.Roll bond evaporator:usually 20 days. October ~ May is busy season of production. during this time will need more days, we arrange production according to the time of order.3.Wire tube condenser:usually 25 days. 4.Filter drier/charging valve:usually 20 days. according to your qua...
A: welcome to visit our company. if you arrived at hangzhou station, we will pick you up from station.
A:Most of our products are produced with copper and aluminum, if the copper price or aluminum price changed, our price will changed.
A:Usually our product is use for 220V~240V, if you need 110V, please tell me before production, we can change voltage for you.
A:1.packing of fin condenser: wooden case/carton2.packing of roll bond evaporator: wooden box3.packing of charging valve: 10pcs/plastic bag/small box/carton4.packing of filter drier: plastic bag or vacuum packing
A:According to your total amount1.100% TT DEPOSIT2.30% DEPOSIT AND BALANCE BEFORE SHIPPING3.30% DEPOSIT AND BALANCE AGAINST B/L COPY
A:If you want to produce fin condenser/evaporator, you can send sample to us, our enginner will check the sample, then he will provide a good quotation.If you want to produce roll bond evaporator, you can tell us the length and the width, and copper length, then take a clear positive picture.If you want other refrigeration parts, just tell us the model.
A:Yes, not only product,but also packing, all we can do according to your require, but the price will have a little different. if you have your own logo or packing or drawings, we will never do same for other customer.
A:For first time, 1.we can reduce the quantity; 2.you can place an trial order; 3.you can buy some samples
A:We are factory of fin condenser and roll bond evaporator, we also trade other refrigeration parts